NuSTAR (Nuclear Spectroscopic Telescope Array) is a space-based X-ray telescope that uses a Wolter telescope to focus high energy X-rays from astrophysical sources, especially for nuclear spectroscopy, and operates in the range of 5 to 80 keV.[3] It is the eleventh mission of the NASA Small Explorer satellite program (SMEX-11) and the first space-based direct-imaging X-ray telescope at energies beyond those of the Chandra X-ray Observatory and XMM-Newton. It was successfully launched on 13 June 2012, having previously been delayed from 21 March due tosoftware issues with the launch vehicle.[4][5]
Its primary scientific goals are to conduct a deep survey for black holes a billion times more massive than the sun, understand how particles are accelerated to within a fraction of a percent below the speed of light in active galaxies, and understand how the elements are created in the explosions of massive stars by imaging the remains, which are called supernova remnants.
History
NuSTAR's predecessor, the High Energy Focusing Telescope (HEFT), was a balloon-borne version that carried telescopes and detectors constructed using similar technologies. In February 2003, NASA issued an Explorer Program Announcement of Opportunity. In response, NuSTAR was submitted to NASA in May, as one of 36 mission proposals vying to be the tenth and eleventh Small Explorer missions.[6] In November, NASA selected NuSTAR and four other proposals for a five-month implementation feasibility study.In January 2005, NASA selected NuSTAR for flight pending a one-year feasibility study.[7] The program was cancelled in February 2006 as a result of cuts to science in NASA's 2007 budget. On 21 September 2007 it was announced that the program had been restarted, with an expected launch in August 2011, though this was later delayed to June 2012.[5][8][9][10]
The principal investigator is Fiona Harrison of the California Institute of Technology (Caltech). Other major partners include the Jet Propulsion Laboratory (JPL), University of California at Berkeley, Danish Technical University (DTU), Columbia University, Goddard Space Flight Center, Stanford University, University of California, Santa Cruz, Sonoma State University, Lawrence Livermore National Laboratory, and the Italian Space Agency (ASI). NuSTAR's major industrial partners include Orbital Sciences Corporation and ATK Space Components.
Launch
NASA contracted with Orbital Sciences Corporation to launch NuSTAR (mass 772 pounds (350 kg))[11] on a Pegasus XL rocket for 21 March 2012.[5] It had earlier been planned for 15 August 2011, 3 February 2012, 16 March 2012, and 14 March 2012.[12] After a launch meeting on 15 March 2012, the launch was pushed further back to allow time to review flight software used by the launch vehicle's flight computer.[13] The launch was conducted successfully at 16:00:37 UTC on 13 June 2012[1] about 117 nautical miles south of Kwajalein Atoll.[14] The Pegasus rocket was dropped from the L-1011 'Stargazer' aircraft.[11][15]On 22 June 2012 it was confirmed that the 10 m mast was fully deployed.[16]
Optics
Unlike visible light telescopes – which employ mirrors or lenses working with normal incidence – NuSTAR has to employ grazing incidence optics to be able to focus X-rays. For this two Wolter telescope design optics with 10.15 metres (33.3 ft) focal length are held at the end of a long deployable mast. A laser metrology system is used to determine the exact relative positions of the optics and the focal plane at all times, so that each detected photon can be mapped back to the correct point on the sky even if the optics and the focal plane move relative to one another during an exposure.Each focusing optic consists of 133 concentric shells. One particular innovation enabling NuSTAR is that these shells are coated with depth-graded multilayers (alternating atomically thin layers of a high-density and low-density material); with NuSTAR's choice of Pt/SiC and W/Si multilayers, this enables reflectivity up to 79 keV (the platinum K-edge energy).[17][18]
The optics were produced, at Goddard Space Flight Center, by heating thin (210 µm) sheets of flexible glass in an oven so that they slump over precision-polished cylindrical quartz mandrels of the appropriate radius. The coatings were applied by a group at the Danish Technical University.
The shells were then assembled, at the Nevis Laboratories of Columbia University, using graphite spacers machined to constrain the glass to the conical shape, and held together by epoxy. There are 4680 mirror segments in total (the 65 inner shells each comprise six segments and the 65 outer shells twelve; there are upper and lower segments to each shell, and there are two telescopes); there are five spacers per segment. Since the epoxy takes 24 hours to cure, one shell is assembled per day – it took four months to build up one optic.
The expected point spread function for the flight mirrors is 43 arc-seconds, giving a spot size of about two millimeters at the focal plane; this is unprecedentedly good resolution for focusing hard-X-ray optics, though up to two orders of magnitude worse than the best resolution achieved at longer wavelengths by Chandra.
